Electromagnetic Compatibility (EMC) Lab


The Electromagnetic Compatibility (EMC) Lab is part of the PSDC’s Shared Services initiative, whereby industry members can have access to high-end testing facilities to support the design and development (D&D) activities for the electrical and electronics (E&E) sector. It is currently home to the largest anechoic chamber in Malaysia, in the form of a 10m Semi-Anechoic Chamber. The EMC Lab also houses a 3m Compact Full Anechoic Chamber, a Conducted Emissions/Conducted Immunity (CE/CI) Room, and an Electrostatic Discharge (ESD) Shielded Room.

Most organisations are set back by the high capital outlay of such investments, which typically have low utilization rates and generate minimal returns. Therefore, the set-up of facilities such as the EMC Lab within a central facility such as the PSDC increases industry access to such instruments which are critical components of success, and thus increase product sophistication.

Lab Capabilities
  • 10 m Compliant Semi-Anechoic Chamber (up to 3 m, 4,000 kg EUT)
    • Max EUT size: 3 m, 4,000 kg
    • Radiated Emissions Frequency Range: 30 MHz — 40 GHz
    • Radiated Immunity Frequency Range: 80 MHz — 18 GHz
    • Field Uniformity: Comply with IEC 61000-4-3
    • Emission measurement (NSA): ANSI C63.4 and CISPR 16 30 MHz — 1 GHz
    • SVSWR: Comply with CISPR 16-1-4, 1 — 18 GHz
    • Shielding: 100 dB up to 40 GHz
  • 3 m Compact Full Anechoic Chamber
    • EUT diameter: 1.5 m
    • Radiated Emissions Frequency Range : 30 MHz — 18 GHz
    • (Pre-compliance)
    • Radiated Immunity Frequency Range: 80 MHz — 18 GHz
    • Field Uniformity: Comply with IEC 61000-4-3
    • Shielding: 100 dB up to 18 GHz
    • SVSWR: Comply with CISPR 16-1-4, 1 — 18 GHz
    • Shielding: 100 dB up to 40 GHz
  • Shielded Room for Conducted Emission and Immunity tests
  • Shielded Room for ESD tests
  • Caters up to 40 prescribed test standards
  • 40GHz CISPR 16-1-1 Compliant EMI Test Receivers
MC Test Standards

Standard Compliance

EC / ISO 17025
EMC directive 89/336/EWG (CE) or 2004/108/EC
EC directive 72/245/EWG revised of 95/54/EG (e1)

CE Mark is a mandatory conformity mark on many products placed on the single market in the European Economic Area.

All commercial electronic devices (unintentional radio-frequency radiators) sold in the United States are regulated by the Federal Communications Commission (FCC).

Planned Test Standards
EN55011Industrial, Scientific, Medical (ISM)
EN55022Information Technology Equipment (ITE)
EN61000-3-2Limits for Harmonic Current Emissions
EN61000-3-3Limitation for Voltage Changes & Flicker
EN61000-6-3(Generic) Residential, Commercial, Light-Industry
EN61000-6-4(Generic) Industry
EN61326-1Electrical Equipment for Measurement, Control and Laboratory Use
EN50366Household and Similar Electrical Appliances
EN55013Broadcast Receivers and Associated Equipment
EN55014Household Appliances
EN300 086 Analogue Speech Radio
EN300 113 Radio Equipment Intended for the Transmission of Data
EN300394-1 TETRA Radio
EN300219Land Mobile Service; Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver
EN 61000-4-2 ESD
EN 61000-4-3Radiated Immunity
EN 61000-4-4EFT/B
EN 61000-4-5Surge
EN 61000-4-6Conducted RF
EN61000-6-4(Generic) Industry
EN 61000-4-8Power Frequency Magnetic
EN 61000-4-11Voltage Dips & Interruptions
EN 61326-1Electrical Equipment for Measurement, Control and Laboratory Use
EN 55020Sound, TV Broadcast Receivers and Associated Equipment
EN 301 489-1 Radio Equipment - General Requirement
EN 301 489-18 TETRA Radio Equipment
EN 301 489-5 Analogue Speech Radio Equipment
EN 55024Information Technology Equipment (ITE)
EN 61000-6-1(Generic) Residential, Commercial and Light-Industry
EN 61000-6-2(Generic) Industry
CISPR 2 Limits & Methods of Measurement of Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles
ISO 7637-2DCTransient & Surge
ISO 11452 Road Vehicles Component Test Methods for Electrical Disturbances
ISO 7637-2DCTransient & Surge
FCC Parts 15, Subpart B, Revision 2008
FCC Parts 15, Subpart C, ANSI C 63.4
FCC Part 18
FCC Part 25
FCC Part 90, TIA 603