Chargeman AO

Program Duration
Program IV
Part-Time Course (480 Hours)
480 Hours - Training at Training Centre
Technical Series
Orientation Briefing PSDC rules and regulation & Introduction to ST Registration
Electricity Supply Act 1990 and Energy Commission Act 2001
Electricity Regulations 1994 and its amendments
Standard MS IEC 60364:2003 Electrical Installations of Building
Resuscitation, first aid and treatment of electric shock
MS 1979:2007 Electrical Installations of Building – Code of Practice
MS 1936:2006 Electrical Installations of Building – Guide To MS IEC 60364
Fire Extinguishing System Handling and operation of portable fire extinguishers
Halon gas system and sprinkler
Alarm system
Protection equipment in low voltage installation All types of circuit breaker (ACB, OCB, MCCB, MCB, ELCB, etc.)
All types of fuses that can be rewired, HRC and time lag fuse
Oil dash pot
Earthing
Power factor:
  1. Definition and calculation of power factor
  2. Effects of low power factor
  3. Capacitor rating for correcting power factor
Basic Electricity Voltage
Current (direct current and alternating current circuit)
Power (kW, kVA, kVAR)
Resistance
Capacitor
Inductor
Transformer Basic Magnetism field
Construction, type, usage, difference with other types of transformer
Function of important parts in transformer
Overhauling
Testing and commissioning
Cable Cable selection:
  • Type
  • Size
  • Current Carrying Capacity
  • Voltage drop
Joints and terminations
Cable damage and analyses
Type of tools to detect damages in cables
Types of cable, sizing, current carrying capacity, drilling, excavation and cable laying for various situations
Underground Cable Cable jointing, phasing and termination
Associated control gears feeder pillar distribution board
Construction, handling and maintenance
Motor and its starter Types of motor, usage, difference and movement
Maintenance, damage detection and repair
Starter including characteristics of protection
Battery Working principle of batteries
Type, sizing, maintenance and charging system
Measurement and testing equipment Introduction and usage of various measurement and testing equipment
Inspection for main switchboard equipment Components of air conditioner
Operation and maintenance
Earthing system, OCB, switchboard, switching tripping equipment, isolator, relay and pilot wiring
Consumer installation Types of wiring for consumer installation
Earthing
Installation testing (model tests)
Installation on neon lamp
Street lighting Installation and maintenance
Study Week and Re-sit Course Work
Final Examination Theory, Oral, and Practical
Mandatory Requirements
  • Must be Malaysian citizen
  • Must not be less than 20 years old on the date of the examination
  • Completed secondary education (Form 5) in a government-aided school
  • Able to write and speak in Bahasa Malaysia
AND
  • Must have minimum three (3) years of work experience in handling/operating electrical equipment and controlling live equipment
  • Possess a complete log book based on the 3-year work experience above, which has been validated by the employer and a competent person
  • Possess Employees Provident Fund (EPF) or Social Security Organization (SOCSO) statements as evidence of the 3-year work experience above
OR
  • Possess a Certificate of Competency:
    • Wireman PW1/PW2/P3/P4/P6 or
    • Polytechnic Certificate in Electrical Engineering
  • Must have a minimum of two (2) years of work experience in handling/operating electrical equipment and controlling live equipment
  • Possess a complete log book based on the 2-year work experience above, which has been validated by the employer and a competent person
  • Possess Employees Provident Fund (EPF) or Social Security Organization (SOCSO) statements as evidence of the 2-year work experience above
  • Language
    English
  • Duration
    480 Hours (Part Time)