Intermediate CMM Measuring Operations


This program focuses on the 5 Axis Coordinate Measuring Machine (CMM) and ways to execute the programs. PC-DMIS provides a flexible environment, allowing for real time error correction and debugging of process characteristics of other geometric software. The techniques used for part programming on a CMM are straightforward and, with practice, systematic.

Upon completion of this program, participants will be able to:

  • Prepare PCDMIS software with CMM Hexagon 5 Axis requirements
  • Set up PCDMIS software with CMM Hexagon 5 Axis
  • Execute PCDMIS software program operation
  • Measure features
  • Execute the Finished Measurement Routine
  • Prepare product inspection report

Who Should Attend

  • Participants who have completed the Basic CMM Measuring Operations program
  • Employees with Engineering background


10 weekdays (Monday until Friday) @ PSDC, Penang. Program commencement is subject to company’s request (for in-house classes) or upon the availability of a sufficient number of participants (for public classes).

Training Outline

  • a. Types of Machine Accessories and Function
  • b. CMM Start-up and Homing Procedure
  • c. Create Measurement New Manual Routines
  • d. Define and Calibrate Probe
  • a. Introduction to PC-DMIS Software
  • b. Define a Probe
  • c. Measure and Alignment Features
  • d. Measure Additional Features
  • a. Measure the Alignment Features
  • b. Set the View
  • c. Set Your Preferences
  • d. Create an Alignment
  • a. Measure Toolbar
  • b. Quick Measure Toolbar
  • c. Auto Measure Toolbar
  • d. Graphic View
  • e. Scanning
  • a. Calculate Dimensions
  • b. Mark Item to Execute
  • c. Set the Report Output
  • d. Execute Program
  • a. Inspection Check Sheet Verification
  • b. Inspection Sheet Report
  • c. Report Endorsement

For further information, please contact
Mohamad Hisham bin Mohd Iqbal (ext 551/ or
Noor Saidatul Munirah bt Saaidun (ext 551/